Products | Howcroft Group

709 Floor Flex Plus Latex 5 litre

This 709 Floor Flex Plus is a premium rubber based Latex additive for use with a self level floor compound and powder tile adhesives to both strengthen the mix and provide a limited degree of movement capability in the sub floor.The Flex Plus is ideal for use when covering sound timber floors, and the 5-litre container is sufficient to mix a 20-kilo bag of self level floor compound or adhesive.Specification: Size: 5L.

£ 16.43

Forever White Grout Reviver 200ml

Forever White Grout Reviver is the easy way to restore discoloured and dirty grout to a bright white finish. Simply apply to grout lines using the easy to use applicator, allow to dry and remove any excess residue with a damp cloth. Mould Shield actively prevents the growth of bacteria, mildew and black mould that are commonly found in areas of high humidity. Depending upon size of tile, will cover approx. 20m squared of tiles.

£ 8.21

Forever White Powder Wall Tile Grout 3kg

With Mould Shield one of the worlds leading anti-bacterial solutions integrated into the manufacturing process, Forever White Powder Wall Tile Grout is guaranteed to stop mould, mildew and bacterial growth.Mould Shield actively prevents the growth of bacteria, mildew and black mould that are commonly found in areas of high humidity.Forever White Powder Wall Tile Grout is independently tested and certified by a NAMMAS accredited microbiological laboratory to show no mould growth after more than 10 Years simulated ageing.Forever White Powder Wall Tile Grout dries to an extra brilliant white finish and is a cement based powdered grouting compound with added PVA to promote adhesion and water repellents to shed water. Simply mix with water to give a pure white paste. -Excellent water resistance.-Dries brilliant white.-Contains Mould Shield - prevents mould growth.-Can be used on wall joints up to 3mm.-Kitchen/Bathroom walls.-Shower areas.-Work tops subject to water contact.-Unsuitable for floors. This grout will cover at a rate of 1.5kg per 6 square. metres of 150 x 150 tiles with a joint width of 2mm. This will vary according to tile size and joint width. See data sheet for further details on coverage.

£ 16.54

Aquaseal Waterproof Tanking Membrane 5 litre

Aquaseal Waterproof Tanking Membrane is a ready to use liquid waterproofing compound that is applied in a 2 coat system by brush. It provides a permanently flexible watertight membrane on floors and walls prior to tiling in shower areas, wet rooms and wet zones and other areas subject to water exposure such as balconies and partially covered external areas. Non-hazardous and solvent free. It is quick drying and tiling can commence after 12 hours.The Aquaseal Waterproof Tanking Membrane can be used on its own in many applications where a flexible watertight membrane is required, or in conjunction with Aquaseal Tanking Primer, Aquaseal Tanking Tape and Aquaseal Tanking Drain Mat, as part of the Aquaseal Wet Room System, to provide a 100% waterproof membrane to conventional plaster and timber based boards. It can be applied to all common building substrates such as plasterboard, MDF, plywood cementitious boards, blockwork, concrete and speciality wet room boards.Benefits:• Can be used on most common building surfaces• Ready to use, no diluting necessary• Easy to apply by brush• Non-hazardous, solvent free • Can be tiled over after 12 hours Areas for Use:• For showers, wet rooms and wet zones in bathrooms• As a Tanking membrane as part of the Aquaseal Wet Room System• As a Primer on most common building surfaces• Balconies and partially covered external areas Limitations:• Do not apply below 10C• Do not apply externally when rain is imminent (within 6 hours)• Do not apply second coat until the first is dry• Damp or humid conditions will significantly extend drying time • It is the users responsibility to determine suitability for use. If in doubt contact Everbuild Technical Services for advice Size: 5L Tub

£ 63.59

TC-TC 618 Tile Cutter 600W 240V

The Einhell TC-TC 618 Tile Cutter has a generously sized work table to provide secure support for guiding large tiles. The cutter has both a mitre cut guide and a parallel guide for mitre and longitudinal cuts. Its diamond cutting wheel runs in a rustproof water tank which not only cools the cutting wheel continuously but also helps prevent the spread of dust. Specification Input Power: 600WNo Load Speed: 3,000/min.Cutting Wheel: 180mm x 25.4mm BoreCutting Depth: @90: 35mm, @45: 22mmWeight: 9.37kg

£ 91.80

708 Self Level Compound 20kg

Everbuild 708 Self Levelling Floor Compound is a cement based product used to level out uneven floors and screeds prior to laying ceramic tiles, thermoplastic tiles, lino, wood block flooring or carpet. Mix with either water or EVERBUILD FLOOR FLEX PLUS to give a free flowing self levelling topping. When mixed as directed, the compound provides a free flowing mix that sets in 90 minutes and can be overlaid after only 8 hours at normal temperatures. NOTE: This product is not suitable for use as a final wearing surface. Size: 20kg.

£ 24.10

Cetol HLS Plus Translucent Woodstain Teak 5 litre

Sikkens Cetol HLS Plus Translucent Woodstain, in Teak, is a low build, solvent-borne semi-gloss woodstain used both as a base stain and as a finishing coat. It is highly translucent to bring out the beauty of woodgrain, it protects against mould and algae, and is resistant to UV radiation, peeling and cracking. Cetol HLS Plus is also microporous and water-repellent It can be used as a finishing coat on exterior softwood and hardwood substrates such as cladding, fascias, soffits, rough sawn timber and fencing. As a base stain, Cetol HLS plus is readily absorbed into timber to provide a sound base for finishing coats. It can be used alone as a system on cladding, decking and garden furniture or as a base stain before the application of Cetol Filter 7 plus or Cetol THB plus on windows and doors. Importantly, it should not be used alone as a finish for hardwood timbers. Specifications: Size: 5L.Colour: Teak,

£ 103.64

Cetol HLS Plus Translucent Woodstain Mahogany 5 litre

Sikkens Cetol HLS Plus Translucent Woodstain, in Mahogany, is a low build, solvent-borne semi-gloss woodstain used both as a base stain and as a finishing coat. It is highly translucent to bring out the beauty of woodgrain, it protects against mould and algae, and is resistant to UV radiation, peeling and cracking. Cetol HLS Plus is also microporous and water-repellent It can be used as a finishing coat on exterior softwood and hardwood substrates such as cladding, fascias, soffits, rough sawn timber and fencing. As a base stain, Cetol HLS plus is readily absorbed into timber to provide a sound base for finishing coats. It can be used alone as a system on cladding, decking and garden furniture or as a base stain before the application of Cetol Filter 7 plus or Cetol THB plus on windows and doors. Importantly, it should not be used alone as a finish for hardwood timbers. Specifications: Size: 5L. Colour: Mahogany.

£ 103.64

Cetol HLS Plus Translucent Woodstain Dark Oak 5 litre

Sikkens Cetol HLS Plus Translucent Woodstain, in Dark Oak, is a low build, solvent-borne semi-gloss woodstain used both as a base stain and as a finishing coat. It is highly translucent to bring out the beauty of woodgrain, it protects against mould and algae, and is resistant to UV radiation, peeling and cracking. Cetol HLS Plus is also microporous and water-repellent It can be used as a finishing coat on exterior softwood and hardwood substrates such as cladding, fascias, soffits, rough sawn timber and fencing. As a base stain, Cetol HLS plus is readily absorbed into timber to provide a sound base for finishing coats. It can be used alone as a system on cladding, decking and garden furniture or as a base stain before the application of Cetol Filter 7 plus or Cetol THB plus on windows and doors. Importantly, it should not be used alone as a finish for hardwood timbers. Specifications: Size: 5L. Colour: Dark Oak,

£ 103.64

Cetol Filter 7 Plus Translucent Woodstain Teak 5 litre

A highly durable, solvent-borne, highly translucent satin woodstain, in Teak, from Sikkens. Cetol Filter 7 is a highly translucent satin exterior woodstain for windows and doors. It can be used as a maintenance coat for existing woodstain systems or over a base stain of Cetol HLS on new or bare timbers. Its advanced UV light absorbers provide superior protection from the damaging effects of sunlight on timber. For use on exterior softwood and hardwood joinery, windows and doors, but not suitable for decking or other areas subject to high levels of abrasion. Specifications: Size: 5L. Colour: Teak.

£ 158.31

Cetol Filter 7 Plus Translucent Woodstain Mahogany 5 litre

A highly durable, solvent-borne, highly translucent satin woodstain, in Mahogany, from Sikkens. Cetol Filter 7 is a highly translucent satin exterior woodstain for windows and doors. It can be used as a maintenance coat for existing woodstain systems or over a base stain of Cetol HLS on new or bare timbers. Its advanced UV light absorbers provide superior protection from the damaging effects of sunlight on timber. For use on exterior softwood and hardwood joinery, windows and doors, but not suitable for decking or other areas subject to high levels of abrasion. Specifications: Size: 5L. Colour: Mahogany.

£ 158.31

Cetol Filter 7 Plus Translucent Woodstain Light Oak 5 litre

A highly durable, solvent-borne, highly translucent satin woodstain from Sikkens, light oak in colour. Cetol Filter 7 is a highly translucent satin exterior woodstain for windows and doors. The can be used as a maintenance coat for existing woodstain systems or over a base stain of Cetol HLS on new or bare timbers. Its advanced UV light absorbers provide superior protection from the damaging effects of sunlight on timber. For use on exterior softwood and hardwood joinery, windows and doors, but not suitable for decking or other areas subject to high levels of abrasion. Specifications: Size: 5L. Colour: Light Oak.

£ 158.31

Cetol Filter 7 Plus Translucent Woodstain Dark Oak 5 litre

A highly durable, solvent-borne, highly translucent satin woodstain, in Dark Oak, from Sikkens. Cetol Filter 7 is a highly translucent satin exterior woodstain for windows and doors. It can be used as a maintenance coat for existing woodstain systems or over a base stain of Cetol HLS on new or bare timbers. Its advanced UV light absorbers provide superior protection from the damaging effects of sunlight on timber. For use on exterior softwood and hardwood joinery, windows and doors, but not suitable for decking or other areas subject to high levels of abrasion. Specifications: Size: 5L. Colour: Dark Oak.

£ 158.31